Call us today to find out why we are your most reliable source for air filters, supplies, service & equipment1-800-783-7407
|Fractional Horsepower Standard||
(2L-3L-4L-5L) Oil and heat resistant and static dissipating with cotton polyester outer cover. Ideal for any light duty fractional horsepower drives including backside idler applications. FHP V-Belts are measured on the outside diameter (Example 4L400=40"OD).
|Fractional Horsepower Dry Fabric Wrapped V-Belts with Kevlar Cord||
(3L-4L-5L) Dry fabric wrapped FHP V-Belts with Kevlar cord are designed for use on most outdoor power equipment and agricultural equipment including lawnmowers, garden tractors, snow blowers, and tillers. They are ideally suited for backside idler and clutching drive applications. An extra dry fabric wrapped cover in addition to the Kevlar coating allows the belt to dissipate heat and last longer than the standard FHP belts. FHP V-Belts are measured on the outside circumference (Example 4L400=40"OD).
(A-B-C-D-E) Our conventional V-Belts are constructed from pre-stretched polyester cord. They are oil and heat resistant and static dissipating. Recommended for all general purpose drives with higher horsepower ratings. Conventional V-Belts are measured on the inside diameter (Example A90 - 90"ID - 92"OD).
|Conventional V-Belts with Kevlar Cord||
(A-B-C-D-E) Our conventional V-Belts are constructed from Kevlar cord. They are oil and heat resistant and static dissipating. Recommended for all general purpose drives with higher horsepower ratings. Conventional V-Belts are measured on the inside diameter (Example A90 = 90"ID - 92"OD).
|Narrow Wedge V-Belts||
(3V-5V-8V) Recommended for all heavy duty drives requiring high horsepower and a compact design when space and weight are limiting factors. Oil and heat resistant and static dissipating. Narrow Wedge V-Belts are measured on the outside diameter. (Example 3V500=50"OD).
|Conventional Rawedge Cogged V-Belts||
(AX-BX-CX) Designed for the tough, small sheaves 1+3 high tension drives. Higher horsepower ratings make it possible to use power belts and thus fewer sheave grooves, resulting in lighter, more compact drives, reducing overall drive costs.
|Narrow Wedge Rawedge Cogged V-Belts||
(3VX-5VX) Recommended for all drives where compact design is required, higher speed is necessary and increased horsepower required. Heat and oil resistant, static conductive. All sizes are available from stock.
|Double Sided V-Belts||
(AA-BB-CC) Double Sided V-Belts are recommended for use in serpentine reverse bend drives or where a change in direction is required. All belts are oil and heat resistant and static dissipating.
|Conventional Banded Belts||(RB-RC-RD) Banded conventional V-Belts are designed for heavy duty drives where shock loading is a problem and multiple matched single belts tend to roll over or jump off.|
|Narrow Wedge Banded V-Belts||(R3V-R5V-R8V) Banded Narrow Wedge V-Belts are designed for heavy duty drives where shock loading is a problem and narrow wedge belts tend to roll over or jump off.|
|Metric Narrow Wedge V-Belts||
(SPZ-SPA-SPB-SPC) Metric Narrow Wedge V-Belts are manufactured for high performance. They are highly flexible, oil and heat resistant and static dissipating.
|Timing Belts||(MXL-XL-L-H-XH-XXH) Recommended for mechanical power transmission drives where synchronization of driven speed is required. Possible substitute for chain and gear drives.|
|Dual Timing Belts||(DXL-DL-DH) Recommended for the dual positive drive which is required to change the direction of one or more synchronous pulleys with one belt. The inside and outside teeth are identical in both size and pitch.|
|Variable Speed Belts||Recommended for use on variable speed sheave drives requiring exact speed control and maximum range of speed changes. Arched construction and strong compression section provide great crosswise rigidity that resists distortion. Oil and heat resistant, static conductive.|
(J-L-M) Recommended for small sheaves, high speed and/or high ratio drives, having longitudinally ribbed traction surfaces. Oil resistant and static conductive.
|HTD Metric Timing Belts||
|Super Torque Metric Timing Belts||
Banded Polymax Belts
Metric Timing Belts
Dual Metric Timing Belts
Metric Conventional Belts
Metric Variable Speed Belts
Automotive Fan Belts
Automotive Serpentine Belts
Automotive Cam Timing Belts
Our automotive cam timing belts are designed and built to provide the positive, no-slip drive requirements needed on demanding overhead cam applications.
Narrow Wedge Cogged Banded
(R3VX-R5VX) Banded Narrow Wedge V-belts are designed for heavy duty drives where shock loading is a problem and narrow wedge belts tend to roll over or jump off.
Variable Speed Combine Drive Belts
Banded Kevlar Cord V-Belts
(RBK) Banded Kevlar conventional V-belts are designed as drive belts in heavy duty applications on agricultural equipment such as combines. We maintain a substantial inventory of this type of belt.